How to fix the pipe support device on the stainless steel straub clamp support device


How to install the stainless steel straub clamp support effectively and reasonably:
1. Before the installation on the welding plate, in order to better determine the direction of the chuck, it is recommended to mark the chuck in the fixed position first, and then weld, pierce the lower part of the chuck body, and then put the plastic stainless steel of the pipe to be fixed. Put the straub clamp in, place the stainless steel straub clamp and the other half of the cover plate, tighten them with screws, do not directly weld the chuck base plate.

stainless steel straub clamp from China manufacturer
2. On the rail of the ground installation, the rail can be welded to the foundation or fixed with screws. The stainless steel straub clamp then pushes the rail nut into the rail and rotates it 90 degrees. The bottom half of the stainless steel straub clamp is embedded in the nut. The fixed stainless steel straub clamp and cover plate are installed on the upper part of the stainless steel straub clamp and fixed with screws.
3. Superimposed assembly, the guide rail can be welded on the foundation or fixed with screws. First, install the aluminum alloy stainless steel straub clamp and the lower half of the stainless steel straub clamp, and then place the upper half of the stainless steel straub clamp where needed. Fix the fixed pipe with screws, and use the anti-loosening cover to prevent it from rotating, and then install two stainless steel straub clamps in the same way as above.
4. The bending device, when installing the bending pipe, the straight hydraulic stainless steel straub clamp should be connected to the front and rear of the bending pipe and fixed with the stainless steel straub clamp. It is advocated that such supporting points should be in a fixed position.
Fixed pipe support---bearing device series products, widely used in light pipe support places where displacement stress is required for pipelines or equipment in electric power, metallurgy, petroleum, chemical and other industries, as well as vibration damping or sliding supports such as bridges, buildings and large equipment occasion.
In addition to supporting weight, restricting (or guiding) displacement, controlling vibration (sloshing) and reducing thrust, the fixed pipe support device has simple structure, large bearing capacity, strong adaptability to heavy pipe clamps, long service life, and price Low cost and other advantages.

Other News


Application scope of sanitary stainless steel clamp

The structure of the sanitary stainless steel clamp is specifically a combination of two stainless steel wires. The clamp joint is an annular clamp joint surrounded by two stainless steel wires. Sanitary stainless steel clamp has the characteristics of beautiful appearance, convenient use, strong clamping force and good sealing performance.


What are the advantages of high pressure pipe repair clamp

What are the advantages of high pressure pipe repair clamp? Quickly install pipes with high pressure pipe repair clamp and corresponding pipe fittings. No welding is required during construction, no need to re-galvanize and re-assemble. The assembly efficiency is improved.


How to deal with high pressure pipe repair clamp in bad condition

As a tool for repairing pipelines, high pressure pipe repair clamp has installation methods and steps, but in many cases, in order to repair faster, it is easy to omit some steps, resulting in bad conditions. How to do it? Let's find out together!


How to deal with the daily problems of straub double lock clamps

Leakage of straub double lock clamps is a very troublesome problem. In daily life, this kind of problem often troubles us. So how should we prevent these problems? Today we will explain to you.


What should be paid attention to when using straub double lock clamps

Straub double lock clamps are connection tools between pipes and pipes, and are detachable connection points between components and pipes. It plays an indispensable and important role in pipe fittings, and it is one of the two main components of hydraulic pipelines.


What are the ways to use stainless steel pipe coupling

There are many ways to use stainless steel pipe coupling, so what are the ways of using stainless steel pipe coupling that we can understand in engineering construction? Let's talk about it in detail today.