What is the installation procedure of pipe clamp straub
Pipe clamp straub material characteristics: density, bending strength, impact toughness, compression strength, elastic modulus, tensile strength, temperature resistance, color.
Pipe clamp straub installer:
Before assembling on the welding board, in order to determine the direction of the clamp, it is recommended to mark the fixing place first, then weld it, insert the lower part of the pipe clamp straub body, and put the pipe to be fixed. Put on the other half of the pipe clamp straub body and cover, and tighten them with screws. Never directly weld the bottom plate with pipe clamp straub installed.
On the ground rail, the rail can be welded to the foundation or fixed with screws. Then push the rail nut into the rail and turn it 90 degrees, insert the lower half of the pipe clamp straub body into the nut, and put the pipe to be fixed, and then Put on the upper half of the pipe clamp straub body and cover, and fix it with screws.
Stacked assembly, the guide rail can be welded on the foundation, or fixed with screws, first install the upper and lower half of the pipe clamp straub body, put the pipe to be fixed, and then put the upper half of the pipe clamp straub body, fix it with screws, and prevent loosening The cover prevents it from turning. Then install the second pipe clamp straub, the method is the same as above.
When assembling the elbow, it should be directly fixed with Yongsheng pipe clamp straub at the front and rear of the elbow. It is recommended that such a support point should be a fixed position.
The structure of the sanitary stainless steel clamp is specifically a combination of two stainless steel wires. The clamp joint is an annular clamp joint surrounded by two stainless steel wires. Sanitary stainless steel clamp has the characteristics of beautiful appearance, convenient use, strong clamping force and good sealing performance.
What are the advantages of high pressure pipe repair clamp? Quickly install pipes with high pressure pipe repair clamp and corresponding pipe fittings. No welding is required during construction, no need to re-galvanize and re-assemble. The assembly efficiency is improved.
As a tool for repairing pipelines, high pressure pipe repair clamp has installation methods and steps, but in many cases, in order to repair faster, it is easy to omit some steps, resulting in bad conditions. How to do it? Let's find out together!
Leakage of straub double lock clamps is a very troublesome problem. In daily life, this kind of problem often troubles us. So how should we prevent these problems? Today we will explain to you.
Straub double lock clamps are connection tools between pipes and pipes, and are detachable connection points between components and pipes. It plays an indispensable and important role in pipe fittings, and it is one of the two main components of hydraulic pipelines.
There are many ways to use stainless steel pipe coupling, so what are the ways of using stainless steel pipe coupling that we can understand in engineering construction? Let's talk about it in detail today.